Viking External Gear Pumps

Viking External Gear Pumps - Spur Gear

Series:  SG Max. Capacity: 190 GPM (45 M³/hr)Max. Pressure: 500 PSI (34 BAR)Max. Viscosity: 1,000,000 SSU (250,000 cSt)Temperature Range: -40°F to +450°F (-40°C to +230°C) Features:  Needle bearings provide high pressure capabilities, sleeve bearing options available. Close-coupled motor mount or foot bracket options to match space or motor requirements. Double pump configurations offer two flow rates operating from a single po...



Viking External Gear Pumps - Mag Drive Spur Gear

Series:  SG-8 Introduction: Viking's Spur Gear series pumps are ideal for low-capacity, high-pressure, motor-speed applications. All pumps increase by capacities of 40%, so there is always a pump within 20% of your capacity needs. Features:  Viking Mag Drive® pumps use magnetic force passing through a statically sealed canister to drive the pump. This eliminates the need for a traditional dynamic shaft seal such as packing or mechanical seals. In turn, this eliminate...



Viking External Gear Pumps - LACT Booster

Series:  GP407, GP410, GP414 Max. Capacity: 210 GPM (7,200 BPD)Max. Pressure: 1000 PSIMax. Viscosity: 2500 SSUTemperature Range: Temperature Range:  Features:  Back Pull-Out Mechanical Seal Single mechanical seal, accessible via shaft end for ease of maintenance; standard Viking units with spacer coupling allow seal change without moving pump or motor Hardened Internal Parts Heat treated shaft and spur-type gears minimize wear while incre...



Viking External Gear Pumps - High Pressure Spur Gear

Series:  GP Max. Capacity: 190 GPM (45 M³/hr)Max. Pressure: 2,500 PSI (170 BAR)Max. Viscosity: 25,000 SSU (5,500 cSt)Temperature Range: -40°F to +450°F (-40°C to +230°C) Specifications   Standard Size Standard Port Nominal Capacity At 1750 RPM Continuous Pressure Intermittent Pressure Inches GPM LPM PSI BAR PSI BAR GP-04 GP-0417 0.375 0.06 0.23 750 52 750 52 GP-0418 0.375 0.14 0.53...



Viking External Gear Pumps - Flow Dividers

Introduction:  Viking Flow Dividers split a fluid flow into two, three, or four equal streams, regardless of differing pressures. These flow dividers are used for a variety of fluid power applications, such as eliminating the need for multiple pumps, and synchronizing hydraulic cylinders. They are also used for equally dividing flow in fuel and lube oil applications, and can be used as pressure boosters. Features:  Anti-friction needle bearings, precision ground heat-treat...



Viking External Gear Pumps - Composite Mag Drive

Series:  Composite Mag Drive: CMD Max. Capacity: 27 GPM (6 M³/hr)Max. Pressure: 150 PSI (10.34 BAR)Max. Viscosity: 25,000 SSU (5,500 cSt)Temperature Range: -40°F to +200°F (-40°C to +95°C) Features:  Inert composite materials for universal chemical compatibility Compact design Sealless Mag Drive (CMD) Entirely non-metallic (CMD) High repeatability for chemical metering Specifications     Size Standa...